Pocket or Concealed-Track Sliding Door? Start With the Wall
Share
Header image: AI-generated design concept, not a completed YOMOGA project.
Choose between these layouts by deciding where the open door can sit. A pocket door needs a cavity inside the wall; a concealed-track sliding door needs a clear route along the wall face. A hidden track changes the appearance of the mechanism, not necessarily the position of the open panel.
That makes the wall more useful than the finish as a starting point. Before comparing colours or asking for a price, check the space the complete system would occupy.
One question, two layouts
Imagine the door fully open. Would its panel disappear into the partition, or remain beside the opening?

| Project question | Pocket layout | Concealed-track surface layout |
|---|---|---|
| Where does the panel travel? | Into a wall cavity | Along the wall face |
| What needs planning? | The pocket and surrounding wall construction | The sliding path and fixing arrangement |
| What could affect the choice? | Existing services and the work needed to create a pocket | Furniture, switches or projections beside the opening |
| What should be confirmed? | The complete frame, panel and hardware combination | The complete panel and sliding mechanism combination |
ECLISSE's general pocket-door guide explains the inside-wall versus alongside-wall distinction. Its system-specific dimensions and certifications are not specifications for a YOMOGA door.
An existing room needs a construction check
If the walls are already finished, establish whether opening or altering a partition is acceptable. A pocket is part of the wall arrangement, rather than an accessory that can be selected from the door's appearance alone.
A surface-sliding layout does not need that pocket, but it still needs suitable support and enough clearance. Check the entire travel path, not just the opening. Ask an installer to assess the proposed system against the actual wall before making a purchase decision.
For a new partition, bring the door layout into the design discussion early. Wall construction, services and finishes can then be considered together. Do not assume a standard pocket assembly is designed to accommodate electrical boxes.
A wood-look photo does not specify the panel
Treat the opening method and the panel specification as separate choices. Ask what the panel core and surface are, which hardware is proposed, and whether those components are compatible.
Likewise, a photograph cannot establish acoustic performance, fire resistance or suitability for a wet area. If the project requires any of these, request evidence for the proposed assembly rather than relying on its name or appearance.
YOMOGA's wooden pocket-door concept and oak-look ghost-door concept offer two starting points for discussing the layout. They are illustrative design concepts. Materials, dimensions, hardware and production availability need confirmation. An oak-look appearance does not establish solid-oak construction.
Make the first enquiry useful

Prepare a small project brief:
- Opening width and height, with units and measurement points.
- Wall type and thickness, if known.
- Space beside the opening and preferred sliding direction.
- Desired appearance, privacy needs and any performance requirements.
- Quantity and project location.
Keep opening and wall photos ready for follow-up. Ask the supplier's drawing to distinguish the panel dimensions, finished passage and structural opening. Then confirm which components the offer includes, rather than comparing a panel-only price with a complete system.
Use the YOMOGA enquiry form to describe the project and measurements. The immediate goal is a suitable configuration to discuss, not a promise that either photographed concept will fit your wall.